5/30/25: This is a rolling release as these mounts come off our 5th axis milling machines. 2.26" right flip for Eotech are available now. Aimpoint 30mm adapters: early June. 1.54" height mounts: mid June. 1.93" height mounts: late June. Left hand mounts: early July. Please sign up for email notifications above for the specific configuration you need.
The Patent Pending Arisaka MMH (Magnifier Mount High) positions Aimpoint and Eotech magnifiers at 2.26", 1.93" and 1.54" optic centerline height over rail. The unique pivot system holds the magnifier securely in place, yet is easy to rotate outwards 90 or 180 degrees. The 180 degree position places the optic well below your view plane, increasing peripheral vision and providing an unobstructed view for the non-dominant eye. Right and left flip versions are available for each height and interface.
Another significant benefit to the MMH is the additional 20mm of eye relief obtained by the rear slung design. This is very helpful for those running a rear iron sight with the magnifier mounted in front of it, or using a short magnifier like the Eotech G43.
The Arisaka MMH matches up with the Arisaka Mk2 Aimpoint Micro and Acro Mounts, providing a complete magnified red dot solution. As with the 2.26" Mk2 red dot mounts, iron sights are visible and unobstructed with the magnifier stowed at 90 or 180 degrees.
Every Arisaka MMH comes standard with an ADM QD Auto Lock lever system for toolless quick disconnect capability.
Please note: The 180 degree position may not be usable in some configurations, depending on weapon platform, magnifier type, mount height, charging handle lever size, and placement on the mounting rail. In general, the 2.26" height mounts can normally utilize the 180 degree position without issue on AR type rifles even with oversized charging handles.
The clamping ring diameter for the Aimpoint version is 30mm, allowing use with the Aimpoint 3X-C, 3XMAG, 3XMAG-1, and 6XMAG-1.
The Eotech version is compatible with the Eotech G33, G43, and G45.
Weight without magnifier (Aimpoint): 4.4 oz
Weight without magnifier (Eotech): 4.0 oz
Optic Centerlines: 2.26", 1.93" and 1.54"
Each mount is CNC machined from 6061-T651 aluminum and MIL-A-8625 Type III hard coat black anodized. Recommended torque values:
Aimpoint clamping ring - 20 inch lbs (9/64" Allen wrench)
Eotech magnifier to mount screws - 20 inch lbs (T25 Torx driver)
This product is covered by U.S. Patent No(s). US7823316B2 and other pending patents.
Made in the USA.
