The Patent Pending Arisaka MML (Magnifier Mount Low) positions Aimpoint and Eotech magnifiers at a 0.9" optic centerline over the rail. This optic height is useful on rifles with a large drop from the top receiver rail to the comb of the stock, such as the AK family and derivatives, IWI Galil ACE, SAN Swiss SG551/552/553, and B&T APC series.
The Arisaka MML uses a unique pivot system which stays securely in place, yet is easy to rotate outwards 90 or 180 degrees. The 180 degree position places the optic well below your view plane, increasing peripheral vision, and providing an unobstructed view for the non-dominant eye. Right and left flip versions are available for the Aimpoint version, while the Eotech/SIG version is only available in right flip due to how it orients the optic to get it lower to the receiver.
The MML matches up perfectly with the Arisaka Low Aimpoint Micro Mount, providing a complete magnified red dot solution. The MML is also compatible with several other low mounts, such as the Aimpoint 12436 and 12738 standard mounts and Aimpoint 12905 LRP, but the red dot and magnifier may not be perfectly in-line.
Every Arisaka MML comes standard with an ADM QD Auto Lock lever system for toolless quick disconnect capability.
The clamping ring diameter for the Aimpoint version is 30mm, allowing use with the Aimpoint 3X-C, 3XMAG, 3XMAG-1, and 6XMAG-1.
The Eotech version is compatible with the Eotech G33, G43, and G45, plus supports any other magnifiers utilizing the Eotech magnifier footprint like those offered by Trijicon, Vortex and Primary Arms. SIG Sauer magnifiers are also supported but you must select the optional SIG hardware pack from the drop down menu.
Weight without magnifier (Aimpoint): 3.9 oz
Weight without magnifier (Eotech): 3.5 oz
Optic Centerline: 0.9" with Aimpoint Micro T1/T2
Each mount is CNC machined from 6061-T651 aluminum and is MIL-A-8625 Type III hard coat black anodized. Recommended torque values:
Aimpoint clamping ring - 20 inch lbs (9/64" Allen wrench)
Eotech magnifier to mount screws - 20 inch lbs (T25 Torx driver)
SIG Sauer magnifier to mount screws - 12 inch lbs (T10 Torx driver)
Made in the USA.
