The Patented Arisaka Offset Scout Mount is designed specifically for the Surefire Scout Light M600 and M300 series weapon lights, the Modlite PLH and OKW weapon lights, the Arisaka 300, 600 and 18650 Series Lights, the Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), and Olight Odin. It replaces the stock Picatinny rail adapter with a low profile mount for SIG's LTAW handguard. The Offset Scout Mount is very low profile at less than 0.20" thick.
When used on the side mounting surfaces, the Offset Scout Mount places the light at a 20 degree angle and tucks it in closer to the rail system. Oriented upwards, the light is located at approximately the 1:30 or 10:30 clock positions.
The Offset Scout Mount also provides three lateral mounting positions for the light body, which allows the user to position the light closer or farther away from the top rail, front sights, or other accessories. Three positions are provided, spanning approximately 0.240". When used with the Arisaka light bodies, even more clearance can be gained for larger front sights.
Compatible with the Modlite PLH/PLHv2/PLHv3 and OKW/OKWv2, Surefire M300A, M300B, M300C, M300V, M312, M322, M312V, M313V, M322V, M600B, M600C, M600P, M600U, M600V, M600DF, M612, M622, M603V, M612V, M622V, Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), Olight Odin, CD REIN, and Arisaka 300, 600 and 18650 Series.
M620, M951/2 and M961/2 series lights can also be used with the Offset Scout Mount with the addition of the Arisaka Offset M620 Adapter.
Length: 1.265"
Weight: 0.4 oz
Distance from center of mounting screw hole to 20 degree angle is 0.405".
The mount is CNC machined from 6061-T651 aluminum and MIL-A-8625 Type III hard coat anodized. Includes necessary screws to attach light body to mount. Requires T20/IP20 and T25/IP25 Torx drivers for installation (not included). A T9 Torx driver is required to remove the stock Picatinny mount from Surefire Scout Lights. Recommended torque: 25 inch lbs for LTAW screws and 20 inch lbs for light body screws with Loctite 222 or 243.
Hardware: Two 10-32x1/4" Torx button head screws (T25/IP25 driver size), two 8-32x3/8" Torx flat head screws (T20/IP25 driver size).
This product is covered by U.S. Patent No(s). 11385026 and other pending patents.
Made in the USA.
